Long-Term Measurement Of The Energy Consumption - Siemens SINUMERIK 840D SL Operating Manual

Ctrl-Energy

17.4 Long-term measurement of the energy consumption

The selection of the axis to be measured depends on the configuration.
References
Information on the configuration is provided in the following reference:
System Manual "Ctrl-Energy", SINUMERIK 840D sl / 828D
17.4 Long-term measurement of the energy consumption
The long-term measurement of energy consumption is performed in the PLC and saved. The
values from times in which the HMI is not active are also recorded.
Measured values
The infeed and regenerative power values as well as the sum of the power are displayed for
the following periods:
● Current and previous day
● Current and previous month
● Current and previous year
Requirement
SENTRON PAC is connected.
Procedure
632
6. If you want to track the consumption values, press the "Details" softkey.
7. Press the "Save measurement" softkey to save the consumption values
of the actual measurement.
1. The "Ctrl-Energy Analysis" window opens.
2. Press the "Long-term measurement" softkey.
The "SINUMERIK Ctrl-Energy Analysis Long-term Measurement"
window opens.
The results of the long-term measurement are displayed.
4. Press the "Back" softkey to terminate the long-term measurement.
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Milling