Modifying The Viewport - Siemens SINUMERIK 840D SL Operating Manual

Hide thumbs Also See for SINUMERIK 840D SL:
Table of Contents

Advertisement

Simulating machining
5.8 Changing and adapting a simulation graphic
5.8.4

Modifying the viewport

If you would like to move, enlarge or decrease the size of the segment of the graphical
display, e.g. to view details or display the complete workpiece, use the magnifying glass.
Using the magnifying glass, you can define your own segment and then increase or
decrease its size.
Precondition
The simulation or the simultaneous recording is started.
Procedure
210
Keep the <Shift> key pressed and then turn the workpiece in the desired
direction using the appropriate cursor keys.
1.
Press the "Details" softkey.
2.
Press the "Magnifying glass" softkey.
A magnifying glass in the shape of a rectangular frame appears.
3.
Press the "Magnify +" or <+> softkey to enlarge the frame.
- OR -
Press the "Magnify -" or <-> softkey to reduce the frame.
- OR -
Press one of the cursor keys to move the frame up, down, left or right.
4.
Press the "Accept" softkey to accept the section.
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Milling

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840de slSinumerik 828d

Table of Contents