Siemens SINUMERIK 840D SL Operating Manual page 271

Hide thumbs Also See for SINUMERIK 840D SL:
Table of Contents

Advertisement

4. Outside contour islands
To simply machine the entire surface outside the island, define a contour pocket around the
blank and then program the island. In this way, the entire surface area is machined and no
residual material is left behind.
Outside contour of the pocket
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
1.
Press the "Contour milling", "Contour" and "New contour" softkeys.
The "New Contour" input window opens.
2.
Enter the contour name (in this case: Part_4_pocket).
The contour calculated as NC code is written as internal subprogram
between a start and an end marker containing the entered name.
3.
Press the "Accept" softkey.
The "Starting point" input window opens.
4.
Enter the starting point of the contour.
X
-10abs
5.
Press the "Accept" softkey.
6.
Enter the following contour elements and acknowledge using the
"Accept" softkey.
6.1.
X
190abs
6.2.
Y
190abs
6.3.
X
-10abs
6.4.
Press the ">>" and "Close contour" softkeys, to close the contour.
7.
Press the "Accept" softkey.
Creating a ShopMill program
7.17 Example, standard machining
Y
-10abs
271

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840de slSinumerik 828d

Table of Contents