Machining type
You can freely select the machining type (roughing or finishing).
For more detailed information, please refer to section "Stock removal".
Procedure
Parameters, G code program
PRG
Name of the program to be generated
PL
Machining plane
RP
Retraction plane – (only for
machining direction,
longitudinal, inner)
SC
Safety clearance
F
Feedrate
Residual
With subsequent residual material removal
material
Yes
•
No
•
CONR
Name to save the updated unmachined-part
contour for residual material removal – (only
"Yes" for residual material removal)
Parameter
Description
Machining
•
•
Machining
•
direction
•
Position
•
•
•
•
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
1.
The part program to be executed has been created and you are in the
editor.
2.
Press the "Turning" and "Contour turning" softkeys.
3.
Press the "Grooving" softkey.
The "Grooving" input window opens.
mm
mm
*
∇ (roughing)
∇∇∇ (finishing)
Face
Longitudinal
front
back
internal
external
Programming technological functions (cycles)
8.5 Contour turning - only for G code programs
Unit
439