Parameter
Stop position
Other M function
Coolant 1
Coolant 2
Tool-spec. function 1
Tool-spec. function 2
Tool-spec. function 3
Tool-spec. function 4
DT
Programmed stop
Stop
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Description
Spindle M function, defines the spindle direction of rotation or spindle position
Spindle off
•
Spindle rotates clockwise
•
Spindle rotates counterclockwise
•
Spindle positions
•
Spindle stop position - (only for spindle M function SPOS)
Machine functions, e.g. "Close door" that are additionally provided by the
machine manufacturer.
Selects coolant (switches coolant 1 on or off)
with
•
without
•
Selects coolant (switches coolant 2 on or off)
with
•
without
•
User machine functions on/off
User machine functions on/off
User machine functions on/off
User machine functions on/off
Dwell time in seconds
Time after which machining is continued.
Programmed stop on
Stops machining at the machine if, under Machine in the "Program control"
window, the check box "Programmed stop" was activated.
Stop on
Stops machining at the machine.
Creating a ShopMill program
7.8 Defining machine functions
Unit
Degrees
s
251