Siemens SINUMERIK 840D SL Operating Manual page 26

Introduction
1.2 Operator panel fronts
Key
26
Function
+ <Cursor left> + <CTRL>
• Editing box
• Navigation
<Cursor up>
• Editing box
• Navigation
+ <Cursor up> + <CTRL>
• Moves the cursor in a table to the beginning of the table.
• Moves the cursor to the beginning of a window.
+ <Cursor up> + <SHIFT>
In the program manager and in the program editor, selects a
contiguous selection of directories and program blocks.
<Cursor down>
• Editing box
• Navigation
+ <Cursor down> + <CTRL>
• Navigation
• Simulation
+ <Cursor down> + <SHIFT>
In the program manager and in the program editor, selects a
contiguous selection of directories and program blocks.
Moves the cursor further to the left by one word.
Moves the cursor in a table to the next cell to the left.
Moves the cursor into the next upper field.
– Moves the cursor in a table to the next cell upwards.
– Moves the cursor upwards in a menu screen.
Moves the cursor downwards.
– Moves the cursor in a table to the next cell downwards.
– Moves the cursor in a window downwards.
– Moves the cursor in a table to the end of the table.
– Moves the cursor to the end of a window.
Reduces the override.
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Milling