Siemens SINUMERIK 840D SL Operating Manual page 682

Alarm, error, and system messages
22.5 PLC and NC variables
Notation for variables
● PLC variables
● NC variables
Note
NC system variables and PLC variables
• System variables can be dependent on the channel. When the channel is switched over,
• For user variables (GUDs) it is not necessary to make a specification according to global
• Using the tooltip, for NC system variables, you can display the OPI notation (with the
Changing PLC variables
Changes can only be made to the PLC variables with the appropriate password.
Changes in the states of NC/PLC variables have a major impact on the machine. Incorrect
configuration of the parameters can endanger human life and cause damage to the
machine.
682
EB2
A1.2
DB2.DBW2
– NC system variables - notation
$AA_IM[1]
– User variables/GUDs - notation
GUD/MyVariable[1,3]
– OPI - notation
/CHANNEL/PARAMETER/R[u1,2]
the values from the corresponding channel are displayed.
or channel-specific GUDs. The indices of GUD arrays are, just like NC variables in the
system variable syntax, 0-based; this means that the first element starts with the index 0.
exception of GUDs).
DANGER
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Milling