Displaying Tool Details - Siemens SINUMERIK 840D SL Operating Manual

13.13

Displaying tool details

All of the parameters of the selected tool are listed in the "Tool Details - All Parameters"
window.
The parameters are displayed, sorted according to the following criteria
● Tool data
● Cutting edge data
● Monitoring data
Protection level
You require access level, keyswitch 3 (protection level 4) in order to edit the parameters in
the detail window.
Procedure
...
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The tool list, the wear list, the OEM tool list or the magazine is opened.
2. Position the cursor to the desired tool.
3. If you are in the tool list or in the magazine, press the ">>" and "Details"
softkey.
- OR -
If you are in the wear list or OEM tool list, press the "Details" softkey.
The "Tool Details" window is displayed.
All of the available tool data is displayed in the list.
4. Press the "Cutting edge data" softkey if you want to display the cutting
data.
Tool management
13.13 Displaying tool details
565