Siemens SINUMERIK 840D SL Operating Manual page 466

Programming technological functions (cycles)
8.6 Further cycles and functions
Parameter
Path/workpiece
Program name
Programming example
N10 T1 D1
N11 M6
N20 G54 G710
N30 M3 S12000
N40 CYCLE832(0.05,3,1)
N50 EXTCALL"CAM_SCHRUPP"
N60 T2 D1
N61 M6
N70 CYCLE832(0.005,1,1)
N80 EXTCALL"CAM_SCHLICHT"
N90 M30
The subprograms CAM_SCHRUPP.SPF, CAM_SCHLICHT.SPF contain the workpiece
geometry and the technological values (feedrates). These are externally called due to the
program size.
466
Description
Path of the subprogram if the desired subprogram is not stored in the same
directory as the main program.
Name of the subprogram that is to be inserted.
;Load tool
;Select work offset
;Switch-on spindle
;Tolerance value 0.05 mm, machining type,
roughing
Externally call subprogram CAM_SCHRUPP
;Load tool
;Tolerance value 0.005 mm, machining
type, finishing
;Call subprogram CAM_SCHLICHT
;End of program
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Milling