2.4 Printer Setup
2.4.1 Attaching the Feeder Guide
You can make sure a check is inserted straight by using the feeder guide.
Attach the feeder guide as described in the steps below:
1. Hold the edge of the feeder guide carefully.
2. Insert the dowels of the feeder guide into the holes inside the printer; then bring it down
until it stops as shown in the illustration below.
Note:
With the ASF model, be sure to attach the feeder guide; otherwise, you cannot load multiple sheets.
2.4.2 Attaching the Pocket Unit
The pocket unit is packed with the printer model with the auto sheet feeder (ASF) function.
Follow the steps below to attach it.
1. Push down the pocket cover on the left of the printer to remove it.
Note:
To attach the pocket cover, push it up.
Rev. F
Dowel
Figure 2-5 Attaching the feeder guide
Figure 2-6 Removing the pocket cover
TM-J9000/J9100 Technical Reference Guide
There are holes for the dowels in
both sides of the printer check slot
➀
➁
Setup 2-5