Output expander controller card cover panel removal
1
Remove the output expander media output bin assembly. Go to
assembly removal" on page
2
Remove the screw (A) on the back side of the option.
3
Remove the grounding screw (B) on the right output option frame guide the grounding cable through the
hole in the frame.
4
Carefully flex the panel from the lower middle and pull the four tab (C) out of the frame and remove.
Output expander controller card removal
1
Remove the output expander controller card cover panel. Go to
panel removal" on page
2
Disconnect all harnesses from the controller card.
423.
427.
Repair information
427
"Output expander media output bin
A
"Output expander controller card cover
4062