High capacity stacker controller card assembly (upper and lower) removal
1
Remove the high capacity stacker controller card cover panel. Go to
cover panel removal" on page
2
Disconnect the harnesses from the controller card.
Note: Pay careful attention to where the power input and output harnesses are attached.
3
Remove the two screws (A) securing the high capacity stacker controller card assembly and remove the
card.
High capacity stacker right frame removal
1
Remove the right media output bin recoil spring.
2
Remove the four screws (A) securing the right frame to the high capacity stacker assembly.
392.
A
Repair information
"High capacity stacker controller card
395
4062