Ppds Emulation; Demo Mode; Factory Defaults; Les Applications - Lexmark T652 Service Manual

PPDS Emulation

This setting allows the user to activate or deactivate the PPDS emulation data stream. When activated, the
following changes also occur:
•
The SmartSwitch settings for each port are turned off.
•
The printer language is changed to PPDS emulation.
Note: Users can still switch languages on the control panel and through the PJL data stream.
1
From the Configuration menu, select PPDS Emulation.
2
Select Deactivate or Activate.
Note: Deactivate is the factory default setting.
3
Depending on your printer model, touch Submit or press the Select button to apply the changes.

Demo Mode

Warning—Potential Damage: Activating this setting only allows the printer to print the demonstration files.
Files received across the network or from the host computer are ignored.
When activated, the printer remains in demo mode until the setting is deactivated.

Factory Defaults

Warning—Potential Damage: This operation cannot be undone.
Except the following, this setting enables users to restore the factory default settings.
•
Display language
•
NETWORK/PORTS menu settings
1
From the Configuration menu, select Factory Defaults.
2
Select one of the following:
•
Restore Base—To restore all non‑critical base printer NVRAM settings.
•
Restore Network or Restore STD Net—To restore all network NVRAM settings.
Note: This is available only to network printers or printers connected to print servers.
•
Restore LES—To restore the factory default settings of the Lexmark Embedded Solutions applications.
This is applicable only to some printer models.

LES Applications

Note: This setting is for touch-screen models only.
This setting allows you to enable or disable Lexmark Embedded Solutions (LES) applications. This setting does
not affect built‑in applications.
1
From the Configuration menu, select LES Applications.
2
Select Enable or Disable.
Note: Enable is the factory default setting.
Service menus
257
4062