53 Unformatted flash detected
Try one or more of the following:
•
Press the arrow buttons until
operation and continue printing.
•
Format the flash memory. If the error message remains, the flash memory may be defective and require
replacing.
54 Serial option <x> error
<x> is the number of the serial option.
Try one or more of the following:
•
Check that the serial cable is connected correctly and is the proper one for the serial port.
•
Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the
printer and host computer.
•
Press the arrow buttons until
•
Turn the printer off and then back on to reset the printer.
54 Network <x> software error
Try one or more of the following:
•
Press the arrow buttons until
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
54 Standard network software error
Try one or more of the following:
•
Press the arrow buttons until
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
55 Unsupported option in slot <x>
<x> is a slot on the printer system board.
Try one or more of the following:
1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the unsupported option card from the printer system board.
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Diagnostic information
175
4062
to stop the defragment
to continue printing.
to continue printing.
to continue printing.