Horizontal White Stripes And Bands (Side To Side Direction) Check - Lexmark T652 Service Manual

Action
Step 6
Check the printhead assembly for proper connection. If necessary,
replace the connections or the printhead assembly. Go to
printhead assembly removal" on page 334
and T656 printhead assembly removal" on page
Does the problem remain?
Step 7
Perform a print test.
Does the problem remain?

Horizontal white stripes and bands (side to side direction) check

Leading edge
Trailing edge
Action
Step 1
Check the media condition. If necessary, load new, dry,
recommended media, and then reprint the defective image.
Does the problem remain?
Step 2
Remove debris or contamination from the media transfer route and
the media path.
Does the problem remain?
Step 3
Check the toner level, and replace the print cartridge if necessary.
Does the problem remain?
Step 4
Check the transfer roll assembly for contamination and wear. If
necessary, replace the transfer roll assembly. Go to
assembly removal" on page
Does the problem remain?
and "T652, T654,
336.
"Transfer roll
314.
Diagnostic information
45
Yes
Go to step 7.
"T650
Contact next level of
support.
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
4062
No
Problem is solved.
Problem is solved.
No
Problem is solved.
Problem is solved.
Problem is solved.
Problem is solved.