Lexmark T652 Service Manual page 291

4062
6
Disconnect the connector (C) from the LVPS card assembly.
C
7
Remove the LVPS card assembly.
Installation warning: Replacement Warning: When replacing the LVPS card assembly, ensure that all
connections are replaced.
Installation warning: Replacement Warning: When replacing the LVPS card assembly, ensure that the
connector pins (D) properly engage the system card.
Installation warning: Replacement Warning: When replacing the LVPS card assembly, ensure that the
voltage selection switch (E) is set to the proper setting, or damage will occur.
D
E
Repair information
291