Action For Prompts; Jobs On Disk; Disk Encryption; Wipe Disk - Lexmark T652 Service Manual

Action for Prompts

This setting determines what action is required from the printer to resolve any paper- or envelope-related
change prompts.
1
From the Configuration menu, select Action for Prompts.
2
Select one of the following:
•
Prompt User—Printer always requires user intervention to resolve the change prompt. This is the factory
default setting.
•
Continue—Printer automatically assumes that the user selects Continue when a change prompt occurs.
•
Use Current—Printer automatically assumes that the user selects Use Current when a change prompt
occurs.
3
Depending on your printer model, touch Submit or press the Select button to apply the changes.

Jobs on Disk

Note: This is applicable only to model T656.
This setting appears only if a hard disk is installed. This does not affect held or parked jobs.
1
From the Configuration menu, select Jobs on Disk.
2
Select one of the following:
•
Delete—To delete the buffered jobs saved on the disk.
•
Do Not Delete—To cancel and return to the Configuration menu. This is the factory default setting.

Disk Encryption

Note: This is applicable only to model T656.
Warning—Potential Damage: If the settings are changed, then the printer completely formats the hard disk.
All information on the disk is unrecoverable.
This setting appears only if a hard disk is installed. It controls whether the printer encrypts the information that
it writes to the hard disk.
1
From the Configuration menu, select Disk Encryption.
2
Select one of the following:
•
Enable—To enable encryption of the hard disk.
•
Disable—To enable formatting of the hard disk.
3
Select Yes to proceed with the encryption or formatting of the disk.
A progress bar appears on the display that indicates the overall completion of the selected operation.

Wipe Disk

Note: This is applicable only to model T656.
Service menus
259
4062