Transfer roll assembly removal
1
Open the operator panel door assembly.
2
Remove the print cartridge.
3
Gently unsnap the transfer roll assembly from the machine.
4
Remove the transfer roll assembly.
Installation warning: When replacing the transfer roll assembly, do not touch the foam surface.
Left transfer roll bracket assembly removal
1
Remove the transfer roll assembly. Go to
2
Remove the inner deflector. Go to
3
Remove the screw (A) securing the transfer roll bracket assembly, left to the machine.
4
Remove the transfer roll bracket assembly, left.
5
Remove the roll clamp (B) from the transfer roll bracket assembly, left.
6
Remove the bushing (C).
7
Remove the spring (D).
"Transfer roll assembly removal" on page
"Inner deflector removal" on page
Repair information
314
314.
299.
4062