Sensor (Pass Through) With Cable Removal - Lexmark T652 Service Manual

Sensor (pass through) with cable removal

1
Remove the 250-sheet frame assembly. Go to
2
Disconnect the sensor (pass through) cable connector from the 250-sheet controller card.
3
Remove the sensor (pass through) with cable.
Sensor (pass through) with cable removal
1
Remove the 550-sheet frame assembly. Go to
2
Disconnect the sensor (pass through) cable connector from the 550-sheet controller card.
3
Remove the sensor (pass through) with cable.
"250-sheet tray frame assembly removal" on page
"550-sheet tray frame assembly removal" on page
Repair information
418
4062
361.
366.