Lexmark T652 Service Manual page 99

Action
Step 7
Perform a print test and check the pick arm assembly for the
appropriate media tray if media is properly picked and advanced
out of the tray. If necessary, replace the appropriate pick arm
assembly. See "T656 operator panel door assembly removal" on
page 310.
Does the problem remain?
Step 8
Perform a print test and check the main motor assembly if media
is properly transported through the pass-thru areas of the media
trays. If necessary, replace the main drive motor assembly. See
"Output cover assembly removal" on page
Does the problem remain?
Step 9
Perform a print test using the appropriate input tray, and if
necessary, replace the input option.
Does the problem remain?
Sensor (duplex input) late jam service check
Action
Step 1
Open and then properly close the rear door assembly.
Does the problem remain?
Step 2
Open and then properly close the fuser access door.
Does the problem remain?
Step 3
Remove obstructions in the internal duplex media path.
Does the problem remain?
Step 4
Check the redrive assembly for damage, and if necessary, replace
the redrive assembly. See
removal" on page 343.
Does the problem remain?
333.
"5-bin mailbox rear door assembly
Diagnostic information
Yes
Go to step 8.
Go to step 9.
Contact next level of
support.
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
99
4062
No
Problem is solved.
Problem is solved.
Problem is solved.
No
Problem is solved.
Problem is solved.
Problem is solved.
Problem is solved.