Horizontal Stripes (Side To Side Direction) Check - Lexmark T652 Service Manual

Action
Step 5
Check the print cartridge for proper installation, and if necessary,
clean and reinstall the print cartridge.
Does the problem remain?
Step 6
Check the heat roll and pressure roll. If necessary, remove and then
reinstall the fuser unit assembly. Go to
removal" on page 331.
CAUTION—HOT SURFACE: Allow the fuser unit assembly
to cool down.
Does the problem remain?
Step 7
Replace the fuser unit assembly. Go to
removal" on page 331.
Does the problem remain?

Horizontal stripes (side to side direction) check

Leading edge
ABCDE
ABCDE
ABCDE
Trailing edge
Action
Step 1
Check the media condition. If necessary, load new, dry,
recommended media, and then reprint the defective image.
Does the problem remain?
Step 2
Remove contamination or obstacles from the media transfer route.
Does the problem remain?
Step 3
Check the print cartridge for proper installation, and if necessary,
clean and reinstall the print cartridge.
Does the problem remain?
"Fuser unit assembly
"Fuser unit assembly
Diagnostic information
47
Yes No
Go to step 6. Problem is solved.
Go to step 7. Problem is solved.
Contact next level of Problem is solved.
support.
Yes No
Go to step 2. Problem is solved.
Go to step 3. Problem is solved.
Go to step 4. Problem is solved.
4062