Functions Of Main Components - Lexmark T652 Service Manual

Functions of main components

•
Pic arm assembly (feed)
•
MPF
•
Xerographics
•
Transfer
•
Fuser
•
Drive
•
Electrical components and rolls
Media tray assembly
It is necessary to adjust the media tray rear guide and media tray side guide of the media tray assembly to
match the media size.
Rear media guide
The rear media tray guide assembly can be adjusted to different media sizes by moving it to the front or rear.
The rear guide should come into contact with the media and hold it in position.
Side guide
The media tray assembly is designed so it can adapt to the media width in the media feed direction by moving
the side guide to the left or right.
Wear strips
The wear strips are designed to provide a fixed resistance to ensure that a single piece of paper is properly
fed out of the media tray. There are several types of wear strips available for custom or hard to feed media.
# Part
1 Standard bin full actuator and sensor
2 Diverter
3 Sensor (fuser output, narrow media)
4 Sensor (duplex input)
5 Pick arm assembly
6 Sensor (option pass through)
7 PC cartridge
8 Sensor (input)
9 PC drum
Appendix C: Theory of operation
521
4062