Size Sensing; Panel Menus - Lexmark T652 Service Manual

This generates reports on several Configuration menu settings, including the following:
•
Reset Cnt
•
Maintenance Counter Value
•
Disable Scanner
•
Disk Encryption
•
Panel Menu
•
PPDS Emulation
•
Reports
•

Size Sensing

•
Factory Defaults
•
Debug Information
Note: Some settings are applicable only to some printer models.
Event Log
This generates a report on the history of printer errors.
From the Configuration menu, navigate to Reports > Event Log.
SIZE SENSING
This setting determines whether the printer automatically senses the size of the paper loaded on the following
paper sources:
•
Tray 1 (integrated)
•
250‑sheet drawer
•
550‑sheet drawer
•
High‑capacity feeder
1
From the Configuration menu, select SIZE SENSING.
2
Select Auto or Off.
Note: When printing, make sure that the size of your document matches the size of the paper loaded on
any of the paper sources.
3
Depending on your printer model, touch Submit or press the Select button to apply the changes.

Panel Menus

This setting allows the system support person to enable or disable the control panel menus. When disabled,
users are not allowed to access and configure the menus.
1
From the Configuration menu, select Panel Menus.
2
Select Enable or Disable.
Note: Enable is the factory default setting.
3
Depending on your printer model, touch Submit or press the Select button to apply the changes.
Service menus
256
4062