Lexmark T652 Service Manual page 136

Action
Step 3
Remove obstructions in the media path.
Does the problem remain?
Step 4
Properly install the envelope feeder assembly.
Does the problem remain?
Step 5
Check all connections on the envelope feeder assembly, and if
necessary, replace the connections.
Does the problem remain?
Step 6
Replace the envelope feeder assembly.
Does the problem remain?
Sensor (envelope feeder pass through) late jam (envelope feeder) service check
Action
Step 1
Remove the envelope feeder.
Does the problem remain?
Step 2
Remove all media present in media path.
Does the problem remain?
Step 3
Remove excess media from the envelope feeder.
Does the problem remain?
Step 4
Check the envelope feeder pick roll for wear and excess
contamination. If necessary, clean or replace the pick roll.
Does the problem remain?
Step 5
Check all connections on the envelope feeder assembly, and if
necessary, replace the connections.
Does the problem remain?
Diagnostic information
136
Yes No
Go to step 4. Problem is solved.
Go to step 5. Problem is solved.
Go to step 6. Problem is solved.
Contact next level of Problem is solved.
support.
Yes No
Go to step 2. Problem is solved.
Go to step 3. Problem is solved.
Go to step 4. Problem is solved.
Go to step 5. Problem is solved.
Go to step 6. Problem is solved.
4062