Media Damage Check - Lexmark T652 Service Manual

Action
Step 5
Check the alignment assembly for proper adjustment. Go to
"Alignment assembly adjustment" on page
replace the alignment assembly. Go to
removal" on page 333
Does the problem remain?
Step 6
Perform a print test.
Does the problem remain?

Media damage check

Leading edge
ABC
DEF
Trailing edge
Action
Step 1
Check the printer installation placement for installation surface
irregularities. Check the printer caster for any damage. If
necessary, correct the installation placement.
Does the problem remain?
Step 2
Properly load media into the media tray assembly and set all guides
correctly. Properly reinstall the media tray assembly into the printer.
Does the problem remain?
Step 3
Check the media condition, and load new, dry, recommended
media if necessary.
Does the problem remain?
Step 4
Check the transfer roll assembly for contamination and wear, and
replace the transfer roll assembly if necessary. Go to
assembly removal" on page
Does the problem remain?
268. If necessary,
"Output cover assembly
"Transfer roll
314.
Diagnostic information
53
Yes No
Go to step 6. Problem is solved.
Contact the next Problem is solved.
level of support.
Yes No
Go to step 2. Problem is solved.
Go to step 3. Problem is solved.
Go to step 4. Problem is solved.
Go to step 5. Problem is solved.
4062