Sensor (Pass Through) With Cable Removal - Lexmark T650n Service Manual

5. Remove the 250-sheet frame assembly.

Sensor (pass through) with cable removal

1. Remove the 250-sheet frame assembly. Go to
2. Disconnect the sensor (pass through) cable connector from the 250-sheet controller card.
3. Remove the sensor (pass through) with cable.
250-sheet controller card assembly removal
1. Remove the 250-sheet frame assembly. Go to
"250-sheet frame assembly removal" on page
"250-sheet frame assembly removal" on page
4062-XXX
4-100.
4-100.
4-101
Repair information