4062-XXX
Sensor (pass through) with cable removal
1. Remove the 250-sheet frame assembly. Go to
2. Disconnect the sensor (pass through) cable connector from the 250-sheet controller card.
3. Remove the sensor (pass through) with cable.
Sensor (pass through) with cable removal
1. Remove the 550-sheet frame assembly. Go to
2. Disconnect the sensor (pass through) cable connector from the 550-sheet controller card.
3. Remove the sensor (pass through) with cable.
Tray roller catch assembly removal
1. Remove the media tray catch spring. Go to
4-196
Service Manual
"250-sheet frame assembly removal" on page
"550-sheet frame assembly removal" on page
"Media tray catch spring removal" on page
4-104.
4-109.
4-158.