Table of Contents
Advertisement
Appendix C: Removing and Replacing Modules
Installing the Fan
Module
174
Figure 74. Removing the FAN10 / FAN10R Module from the Switch
3. Continue with the next procedure to install a new FAN10 / FAN10R
module.
This procedure requires the following tool:
#2 Phillips-head screwdriver (not provided)
To install a fan module, perform the following procedure:
1. Remove the new fan module form its shipping box. Align the fan
module in the slot, with the module name on the left. Refer to
Figure 75.
Figure 75. Aligning the FAN10 / FAN10R Module in the Switch Slot
Advertisement
Table of Contents
