Figure 37. Installing The At-Stackxg Stacking Module; Figure 38. Securing The At-Stackxg Stacking Module - Allied Telesis x600-24Ts-POE Installation Manual

Chapter 3: Installing the Hardware
76
Caution
Do not force AT-StackXG module into place. Doing so may damage
the connector pins on the backplane inside the chassis. If there is
resistance, remove the module and reinsert it after verifying that the
edges of the card are properly aligned in the guides in the chassis'
module slot.
A T -L X
A T -S ta
4 4 C P
c k X G
U C V R
S ta ck
P o rt
1

Figure 37. Installing the AT-StackXG Stacking Module

4. Secure AT-StackXG module to the chassis by tightening the two
captive screws with a cross-head screwdriver.
- L X 4 4
A T
A T - S ta
C P U C

Figure 38. Securing the AT-StackXG Stacking Module

S ta ck
P o rt
2
c k X G V R
S ta c k
P o rt
1
S ta c k
P o rt
2
1242
1243