Model Type - GRAUPNER mz-24 Pro Programming Manual

Model type

Change the model type
Switch your receiver system and the RF module of
your transmitter off. In the basic transmitter display,
use your finger or the provided stylus to touch the
gear icon labeled "B" to accede into the base menu:
Touch
The display switches to the "green" base menu. Touch
the menu item "Model Type".
Touch
If after touching the "MODEL TYPE" icon in stead of
the awaited menu it appears the warning message ...
... then there is still a connection between transmitter
and receiver. Switch your receiver off and try again.
60 Base menu - Model type
In the delivered form the transmitter the model selec-
tion display looks for example like this:
Normally, the basic type of model is specified when
creating the model memory in the sub-menu
el selection" of the base menu. In the "Model Type"
sub-menu, you can directly change the type of the
current model. When such a change is made, all of
the mixers, coupling functions, etc. for the previous
model type are also deleted or at least need to be
adapted to the changed type.
Notice
Once you change any of the existing settings, all
of the relevant parameters are reset.
Programming
For example, the model memory 01 already used for
an helicopter has to be reprogrammed in the model
type "motor model". So Tap the first of the fields to be
changed, in this example, the key of the model under-
lying programming model type:
Touch
Touch
As described in detail in the section
gramming the basic settings of a new
manual configuration of a model memory starts with
a safety query:
"Mod-
Touch NO to terminate the procedure. Touching
will cause a change of the color of the OK button for
about 1s. Afterwards the model type selection is avail-
able.
Following the example, touch the central button la-
beled "HELI" in this display...
Touch
... the display then switches to the selection of the
next option...
"Manually pro-
model", the
OK