Announces - GRAUPNER mz-24 Pro Programming Manual

Announce
Setting individual announces
In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "B":
Touch
The display switches to the "green" base menu. Tap
now on the menu point "ANNOUNCE":
Touch
As standard in the memory of the mz-24 HoTT Pro
transmitter are saved, near the data for the different
other announces of the transmitter, also the so called
User-Voice-Files. These special announces, normally
numbered from 285 to 294, can be replaced if required
by individually created .wav files through the dedicat-
ed program point of the Firmware_Upgrade_grStudio.
These, and if required also the lower numbered ones,
voice files can be assigned in the menu point »An-
nounces« as phase specific or phase crossing.
118 Base menu - Announces
Phase depending settings
The here mentioned sub-menu offers the possibility
of phase specific settings. Recognizable on the top
left side of the display in green color is displayed the
phase name. As standard is displayed the name of the
phase 1, which is indicated by the name "NORMAL"
or "PHASE 1". As soon as you will have defined one
or many other phases in the "PHASE" menu, you will
be able to switch among those phases. Activate the
corresponding switch or switches if desired to switch
between the phases.
"CTL" column
In this column you can assign a switch, as detailed
described in the section "Control and switch assign-
ment", for example:
Notices
Free switch choice is only possible until in the val-
ue field of the "PHASE" column is selected "CO".
As soon as this value is changed to "SE", it will be
possible to assign only the switches which have been
assigned to NO phase to this model memory in the
"PHASE" menu. Otherwise there will be an error func-
tion.
"PHASE" column
In this column you can change between "CO" (glob-
al), which means model memory specific, and "SE"
(phase), then phase specific announce. Tap on the
value field of the value that you want to change, for
example:
Touch
"ANNOUNCEMENT" column
In this column you can activate, according to the
switch position and to a phase, one of the "User_
Voice" announces. Tap on the desired value field in
the "ANNOUNCEMENT" line:
Touch
The color of the field switches from black to blue: