Setting up phases
• "PHASE" column
As long as the actual settings belong to Phases,
they are referred to "Phase 1". To set up the first
real phase, touch the desired value field in the
"PHASE" column such as "PHASE 2" (or higher):
Touch
The color of the field switches from black to blue:
Tip
In order to set Phase 6, touch
page] at the top right of the display.
• NEW button
The selected Phase is activated by tapping on
the
NEW
button:
In the "SLOW" (delay) and "CTL" (control) column
will appear other value fields:
•
NAM
button
You can describe or change to the existing Q.Link
name by touching the
right of the display with your finger or provided
stylus as described in detail in the section
name", such as to the name "START":
NEXT
[change
And at this moment you can assign the Phase 1
a name so that it will be possible to assign an-
nouncements, e.x. "NORMAL":
Touch
•
(Name)
"NAM
[Name] button at the
"Model
CPY
button
A blue, set-up phase that is therefore active can be
copied to any another phase by touching the
[copy] button at the right of the display with your
finger or the provided stylus, for example:
Touch
After you touch the
CPY
button, a window ap-
pears and asks you the reason for copying:
Touch
NO
to terminate the procedure.
To change this setting, repeatedly touch the button
below "TARGET",...
Function menu | general - Phase
(Copy)
CPY
121