GRAUPNER mz-24 Pro Programming Manual page 212

Etc. Set
Various transmitter-wide settings
In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "S":
The display switches to the purple main menu. Touch
the menu item "Etc. Set":
Touch
In the first line of the "Etc. Set" sub-menu it is possi-
ble to change the key lock deactivation from the stan-
dard push of both ESC and ENT buttons located on
the sides of the display, through a lock code. In the
next lines it is possible to pre-set some settings ac-
cording to the customer preference.
212 System menu - ETC set
"Touch unlock" line
Touch
To set an individual PIN tap on the
"Touch unlock" line:
The corresponding input menu opens:
In this sub-menu you can input a PIN with a maximum
of 14 characters, as detailed described in the section
"Model name", for example:
Tapping on the
tapping on
>> button in the
input field. Tapping on the
part of the display, confirms the input characters in
the "New Unlock Code" field:
Touch
• Locking the displays
< button deletes the last character,
<< deletes all the characters in the blue
= button, in the lower right
As soon as you have left this display push at the
same time and keep pushed both ESC and ENT
buttons on the sides of the display for about one
second until a short beep will be emitted, now the
touch-function of the display is locked. Both but-
tons can be released. The transmitter reacts only
to the lateral buttons so as to the control elements
used to control a model.
Notice
Remark well the CODE and keep it in safe for
the feature. Otherwise you will have to tap all
the possible character combination until you
will have found the right one ... or alternatively you
can send the transmitter to the Graupner Service to
unlock it.