GRAUPNER mz-24 Pro Programming Manual page 186

Set the desired grade of differentiation with the
or – button at the right edge of the display, for ex-
ample:
With the provided other flap pairs proceed simi-
larly.
Touch the RES button to reset a changed value in
the blue (and hence active) field to the default val-
ue.
• Programming the reduction
A 0% value in the right column means that the "ai-
leron differentiation" programmed in the transmit-
ter is held. A value equal to the set percentage of
the aileron differentiation means that this, in maxi-
mum butterfly function (with flaps completely out)
is completely removed. In case of a reduction val-
ue bigger than the set aileron differentiation this
will be removed completely before the full deflec-
tion of the flap control stick.
To set up the reduction of the differentiation tap in
the left one of the two columns on the desired val-
ue field with a finger or the provided stylus, for ex-
ample:
186 Function menu | Airplane models - Aileron settings
Touch
+ The adjustment range of ±150 % to allows you to
set the reduction of the set differentiation com-
pletely independently from the direction of rotation
of the servos installed in the wings.
The color of the field switches from black to blue:
Set the desired grade of differentiation with the
–
or button at the right edge of the display, for ex-
ample:
With the provided other flap pairs proceed simi-
larly.
Touch the RES button to reset a changed value in
the blue (and hence active) field to the default val-
ue.
After you have finished making your settings, touch
BACK
the button at the top left of the display to return
to the menu selection:
+