Heli Mixer - GRAUPNER mz-24 Pro Programming Manual

Heli mixer

Phase-dependent settings of pitch, roll and nick
In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "F":
Touch
The display switches to the blue function menu. Touch
the menu item "S.MIX":
Touch
In the following menu "HELI-MIX" addressed below,
the flight-phase dependent mixers "ROLL >> NICK",
"NICK >> ROLL", "PITC >> ROLL", and "PITC >>
NICK" are described. These menus are used espe-
cially for compensating asymmetrical helicopter reac-
tions to control commands and to adjust helicopters
with multi-blade rotors.
Phase-dependent settings
This sub-menu offers the possibility of phase specific
settings. Recognizable on the top left side of the dis-
play in green color is displayed the phase name. As
standard is displayed the name of the phase 1, which
is indicated by the name "NORMAL" or "PHASE 1".
As soon as you will have defined one or many oth-
er phases in the "PHASE" menu, you will be able to
switch among those phases.
174 Function menu | Helicopter model - Helicopter mixer
Activate the corresponding switch or switches if de-
sired to switch between the phases.
• ACT column
In in the value fields of this column, indicate wheth-
er the function of the line is generally blocked
( BLK ) or ON .
Once you set this value field to ON, you can turn
the effect of the respective control element on the
selected mixer for specific quick links individual-
ly on and off with a control assigned in the option
field "Ctrl/sw" (see below in the section).
• SET column
Touch one of the four buttons in this column to
open the setting page for the selected mixer, for
example:
Touch
Based on the defaults shown here, you can adapt
the current settings as needed by touching the val-
ue field to be changed to activate it, for example:
(active)
Touch
The color of the value field switches from black to
(setting)
blue:
You can change the current value in the blue (ac-
tive) value field by touching the
the right edge of the display, for example:
+ or – buttons at