GRAUPNER mz-24 Pro Programming Manual page 43

"Model type"
Since at this juncture we want to program an "air-
plane with electric drive", touch the selection field
"MOT(motor model)":
Touch
After selecting the basic model type, the following ap-
pears in the display...
"Wing type"
... in which you can specify the number of aileron and
flap servos by touching the corresponding selection
field:
You can switch beforehand to the selection list for del-
ta/flying fixed-wing models by touching the top but-
ton labeled Normal:
After you select a wing type, the following display ap-
pears...
"Tail type"
..., in which you can specify the type of your tail:
Finish your entry by selecting...
"Propulsion type"
... For your model:
Tip
The default for " Motor off" or "Idle" = "Rear thro posi-
tion" can be switched to "Front thro position" for fixed-
curve" menu, by inverting
wing models in the "Throttle
the control curve.
After the propulsion type has been selected, a display
appears with an overview of the previous entries such
as...
..., which you can leave to go to the base menu by
touching the ENT button at the right bottom:
Base menu - Model selection 43