Logical Switch - GRAUPNER mz-24 Pro Programming Manual

Logical switch

Programming the logical switch
In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "F":
Touch
The display switches to the blue function menu. Touch
the menu item "Logical sw".
Touch
Through this function two switches, controls and/or
logical switches or the favorite combination of them,
can be interconnected in an "AND" or "OR" switch.
A total amount of 8 logical switches "L1 ... L8" can be
programmed:
The result of such a logical switch function, indicated
on the right in the display, can be used as alternative
switch function.
148 Function menu | general - Logical switches
Programming
The assignation of a required switch for a logical con-
nection is performed as usually in both value fields
of one line as described in the "Control and switch
assignment" section. Tap on the left value field of the
logical switch to program, for example:
Touch
Weather the corresponding selection window ap-
pears:
Touch NO to terminate the procedure.
The assignation of a switch, control switch or logical
switch to both fields in one line follows as detailed de-
scribed in the "Control and switch
tion, for example:
"AND" / "OR"
The standard switch connection "AND", and vice ver-
sa, is set by tapping the related value field, for exam-
ple:
• "AND"
A logical switch is only then "closed", when both
switches are "closed".
• "OR"
A logical switch is already "closed" when one of
both assigned switches is closed.
The related actual switch position of the logical
switches is displayed in the right column:
assignment" sec-
Touch