Modulation Mode; Model Type; Control Mode - GRAUPNER mc-16 Programming Manual

MODULATION MODE

Selecting the Modulation Mode
(access via System Menu)
The first option in the System Menu is to set the type
of modulation. This varies depending on the type of
receiver you will be using. The mc-12, mc-18, mc-20
and DS 20 mc are PCM types (Pulse Code
Modulation) and are used with the transmitter set to
PCM modulation. This is indicated by a letter "C" in
the display. For FM (Pulse Position Modulation)
receivers the transmitter must be switched to FM
(PPM) operation, and the display will show an "F".
Switch from one to the other by pressing the
buttons.
DEC

MODEL TYPE

Establishing the Model Type
(access via System Menu)
The mc-16/20's Multisoft program differentiates between five
different types of model. The selection must be made before re-
programming a model using the Set-Up Menu (see later) because
the menu determines which options can be called up by the Type.
A summary of the five ready-made multi-function programs is on
pages 26 – 27.
Your reach this code using the
types are available, each selected with the
If you change the current model type using the
buttons the new model type will flash in the display. It is not
adopted until you confirm the selection with
+ ROLL DN ). When you confirm the selection, all the options in
or
INC
the Set-Up Menu will change accordingly. All the original set-up
parameters of this memory will be lost when changing model type.
If necessary, you can return to the current model by pressing the
INC , DEC or CLEAR buttons before you press enter.
Summary of the ready-made multi-function programs
Transmitter Stick Functions for Channels 1...4
(access via System Menu)
Activate the System Menu and select "MOD" by
pressing the
change to mode 1 – 4 using the
buttons. All other functions are automatically
matched to the stick mode you have selected.
ROLL UP button. Five model
INC or DEC buttons.
INC / DEC
ENTER ( ROLL UP
Stick Modes – Fixed-Wing Aircraft
Stick Modes – Helicopter (see page 66)
Throttle = Collective Pitch
Aileron

CONTROL MODE

(or ). You can now
ROLL UP ROLL DN
or
INC DEC
Elevator = Pitch
= Roll Rudder = Tail Rotor
System Menu 15