GRAUPNER mz-24 Pro Programming Manual page 175

Use the same procedure for the value on the oppo-
site side of the control travel, for example:
Touch the RES button to reset a changed value in
a blue (active) value field to the default value.
You can make any necessary settings in the two
bottom EXP value fields as in the related descrip-
tion in the section ""Dual rate, Expo"".
After making your settings, leave this display and
go to "Heli-Mix" selection by touching the
button at the top left of the display.
Touch
Notice
The mixed values portrayed here are for
demonstration purposes only and do not rep-
resent real values.
Select another mixer here if desired and adjust it
as described.
• "CTL" column
In this column, as described in the section
and switch assignment, assign a control to the re-
spective mixer that you can use to turn the mixer
on and off, for example:
BACK
After making your settings, leave this menu and go to
"Menu selection" by touching the
top left of the display.
(Control/switch)
Control
BACK button at the
Function menu | Helicopter model - Helicopter mixer 175