Flap Sett - GRAUPNER mz-24 Pro Programming Manual

Flap Set
Adjusting the effect of the flap servo
This sub-menu is hidden when selecting "1 AILE" in the
basic settings of the actual model.
In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "F":
Touch
The display switches to the blue function menu. Touch
the menu item "Flap set":
Depending on the selected number of ailerons and
flaps, the display shows different views: The top of the
two following figures shows the display when setting
the minimum "2AILE", and the bottom figure shows
the display when selecting the maximum "... 4FLAP".
196 Function menu | Airplane models - Flaps settings
Phase-dependent settings
The here mentioned sub-menu offers the possibility
of phase specific settings. Recognizable on the top
left side of the display in green color is displayed the
phase name. As standard is displayed the name of the
phase 1, which is indicated by the name "NORMAL"
or "PHASE 1". As soon as you will have defined one
or many other phases in the "PHASE" menu, you will
be able to switch among those phases. Activate the
corresponding switch or switches if desired to switch
between the phases.
Touch
Programming
• ACT column
• "ACT" = INH or OFF
As long as "ACT" is deactivated ...
... the standard or previously customized val-
ues of the "aileron" option of the
sub-menu are valid ...
... on the standard flap servos 6 and 7 so as 9
and 10, or in case of a model with only one flap
servo only to the servo 6.
(active)
"Flap MIX"