Swashplate Mixer - GRAUPNER mz-24 Pro Programming Manual

12 channel hott 2,4 ghz transmitter
Hide thumbs Also See for mz-24 Pro:
Table of Contents

Advertisement

Swashplate mixer

Pitch, roll and nick mixer
This sub-menu is hidden when selecting "1 (swashplate)
servo" in the basic settings of the model.
In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "F":
Touch
The display switches to the blue function menu. Touch
the menu item "Swash":
Touch
In the basic settings, you have specified how many
servos are installed for pitch control in your helicopter
in the "Swash" display. Once this entry is made, the
required mixers for the swashplate functions of roll,
elevation and pitch axis are activated so that you do
not have to define any additional mixers.
With helicopters that are controlled only using a sep-
arate pitch servo, the menu item "Swash" is unnec-
essary since three swashplate servos are operated
separately for pitch, elevation and roll by the software
program; that is, without any mixer. Consequently the
menu item "Swash" will also be obscured by select-
ing "1 SERVO":
172 Function menu | Helicopter model - S.Mix
With all other swashplate linkages employing 2 ... 4
collective pitch servos, the mixer ratios and directions
are set up by default, as represented in the following
display for "3Sv 120° (roll)" swashplate of an helicop-
ter. The preset is +61%...
... but the value can be varied from -100% to +100%
if required.
As usual, touch the  value field  of the mixer to be
changed, for example:
You can change the current value in the value field as
needed by touching the
or
 – 
buttons at the right
edge of the display, for example:
Touch the
RES
button to reset a changed value in a
blue (active) value field to the default value.
If the swashplate control (pitch, roll and elevation)
does not respond to the control sticks properly, you
should alter the mixer directions ("+" or "-") before try-
ing to correct the directions of servo rotation.
Notice
Ensure that changed mixer values do not result in
the servos mechanically striking their end-stops.
After making your settings, leave this menu and
go to "Menu selection" by touching the
at the top left of the display.
BACK
button

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S1006.pro

Table of Contents