4�9�9� Type Of Installation; 4�9�10� Maximum Demand Integration Period - Circutor CVM-C10 Instruction Manual

IEEE Ieee measurement convention.
To validate the data, press
Press key
4�9�9� TyPe Of INSTALLATION
The key is used to browse the different options
transformers with an ARON connection .
To validate the data, press
Press key
4�9�10� MAXIMUM DeMAND INTegRATION PeRIOD
When the desired value is shown on the screen, move onto the next digit by pressing the key
to modify the other values.
If you press the
can modify the previously programmed values again.
To validate the data, press
50
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
The type of installation is selected on this screen.
Press key
prog icon will be displayed on the bottom of the screen.
Three-phase network measurement with a 4-wire connection.
Three-phase network measurement with a 3-wire connection.
Three-phase network measurement with a 3-wire connection and
Two-phase network measurement with a 3-wire connection.
Single-phase network measurement, phase to phase, with a 2-wire connection.
Single-phase network measurement, phase to neutral, with a 2-wire connection.
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
The maximum demand integration period is programmed in
minutes on this screen.
Press key
The prog icon will be displayed on the bottom of the screen.
To enter or modify the value, press the
increasing the value of the flashing digit.
key after changing the last digit, it will jump back to the first digit so you
for 3 seconds and the prog icon will disappear from the display.
for 3 seconds to edit the type of installation. The
for 3 seconds to edit the integration period value.
CVM-C10
key repeatedly,
Instruction Manual