Press key
4�9�20� kgC0
The emission ratio of the 3 tariffs of the device, T1, T2 and T3, is programmed on this screen.
To enter or modify the value, press the
digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key
to modify the other values.
If you press the
can modify the previously programmed values again.
Press key
To validate the data, press
The programmed value will be deleted if the entered value is higher than the maximum
programming value.
Maximum programming value: 1.9999.
Minimum programming value: 0.
Press key
4�9�21� COST RATIO Of geNeRATeD eNeRgy
When the desired value is shown on the screen, move onto the next digit by pressing the key
56
to access the next programming step.
CARBON eMISSION RATIO Of CONSUMeD eNeRgy
2
The carbon emissions ratio is the amount of emissions released
into the atmosphere to produce a unit of electricity (1 kWh).
The ratio for the European mix is approximately 0.65 kgCO
kWh.
Press key
The prog icon will be displayed on the bottom of the screen.
key after changing the last digit, it will jump back to the first digit so you
to browse the different tariffs.
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
The cost per kWh of electricity of the three tariffs of the unit is
calculated on this screen.
Press key
prog icon will be displayed on the bottom of the screen.
To enter or modify the value, press the
increasing the value of the flashing digit.
for 3 seconds to edit the emission ratio selection.
key repeatedly, increasing the value of the flashing
for 3 seconds to edit the cost ratio selection. The
CVM-C10
per
2
key repeatedly,
Instruction Manual
Need help?
Do you have a question about the CVM-C10 and is the answer not in the manual?
Questions and answers