4�5�2� E 3 Profile - Circutor CVM-C10 Instruction Manual

 Maximum Demand
The device calculates the maximum demand of the following:
• Current
• Three-Phase Active Power.
•Three-Phase Apparent Power.
This value can be displayed on the display screen of the parameter by pressing the
and
The dem symbol appears on the display (
Press keys
The maximum demand values are reset on the programming menu:
"4.9.11. Deleting maximum demand"
4�5�2� e PROfILe
3
This profile is identified with the e
40
figure 28: Analyzer profile screen displaying the minimum values.
keys at the same time.
figure 29: Analyzer profile screen displaying the maximum demand values.
or to stop displaying the maximum demand values.
symbol on the bottom of the screen (
3
figure 30: CVM-C10 screen with the e
)
figure 29
profile.
3
CVM-C10
).
figure 30
Instruction Manual