4�9�30� Locking The Programming - Circutor CVM-C10 Instruction Manual

 MAC
When the desired value is shown on the screen, press the
modify the other values.
If you press the
can modify the previously programmed values again.
Maximum programming value: 255.
Minimum programming value: 0.
To validate the data, press
Press key
4�9�30� LOCKINg The PROgRAMMINg
When you enter the programming menu you can view and modify the programming. Icon
on the display indicates the permanently locked status.
When you enter the programming you can view the programming but not modify it. Icon
indicates the locking status. Enter the password to modify the programming values.
To validate the data, press
Press the
70
The MAC address is programmed on this screen.
Press the
will be displayed on the bottom of the screen.
To enter or modify the value, press the
increasing the value of the flashing digit.
key after changing the last digit, it will jump back to the first digit so you
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
This screen is for protecting the data configured in the
programming menu.
Press key
selection. The prog icon will be displayed on the bottom of the
screen.
Press key
for 3 seconds and the prog icon will disappear from the display.
key to enter the password for locking and unlocking the programming:
key for 3 seconds to edit the value. The prog icon
key to go to the next digit and
for 3 seconds to edit the locking/unlocking
to browse the two options:
CVM-C10
key repeatedly,
Instruction Manual