4�9�4� Secondary Current ( Model Cvm-C10-Itf); 4�9�5� Primary Neutral Current ( Model Cvm-C10-Itf-In) - Circutor CVM-C10 Instruction Manual

To validate the data, press
The programmed value will be deleted if the entered value is higher than the maximum
programming value.
Maximum programming value: 10000.
Minimum programming value: 1.
Voltage ratio x Current ratio < 600000
Note: The ratio is the relation between the primary and the secondary.
Press key
4�9�4� SeCONDARy CURReNT ( MODeL CVM-C10-ITf)
To validate the data, press
Press key
4�9�5� PRIMARy NeUTRAL CURReNT ( MODeL CVM-C10-ITf-IN)
When the desired value is shown on the screen, move onto the next digit by pressing the key
to modify the remaining values.
If you press the
can modify the previously programmed values again.
To validate the data, press
The programmed value will be deleted if the entered value is higher than the maximum
programming value.
48
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step
On this screen the current transformer secondary is selected.
Press key
value. The prog icon will be displayed on the bottom of the
screen.
Press key
transformer secondary (1A or 5A).
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step
The neutral current transformer primary is programmed on this
screen.
Press key
value. The prog icon will be displayed on the bottom of the
screen.
To enter or modify the value, press the
increasing the value of the flashing digit.
key after changing the last digit, it will jump back to the first digit so you
for 3 seconds and the prog icon will disappear from the display.
for 3 seconds to edit the transformer secondary
to browse the two possible options for the current
for 3 seconds to edit the transformer primary
CVM-C10
key repeatedly,
Instruction Manual