4�5�3� User; 4�6�- Harmonics - Circutor CVM-C10 Instruction Manual

CVM-C10
4�5�3� USeR
This profile is identified with the user symbol on the bottom of the screen (
This profile displays the screens selected in the programming menu (
).
eration profile"
The voltage and current harmonics are also displayed, up to the 31st order harmonic, for each
of the lines, L1, L2 and L3 ("
4.6.- HARMONICS
The device can display the voltage and current harmonics, up to the 31st order harmonic, for
each one of the lines, L1, L2 and L3.
The display of these can be deactivated using the programming menu (
harmonics display screen."
Press the key on the last profile screen to show all operation profiles on the harmonics
display screens.
Harmonics are displayed as shown on
Press key to open the next harmonics screen.
Press key to display the different types of harmonics:
Instruction Manual
figure 31: Screen of the CVM-C10 with the user profile.
.")
4.6.- HARMONICS
).
figure 32
figure 32: CVM-C10 Current harmonics screen�
.
).
figure 31
"4.9.12. Selecting the op-
"4.9.18. Activating the
43