System Configuration - Burkert 8630 Operating Instructions Manual

2

SYSTEM CONFIGURATION

NOTE The following picture illustrates a complete system, based on
•
•
These elements linked together compose a functional unit.
The function ranges of the Bürkert pneumatic control valves are greatly increased when in combination with the Top Control
positioner. These valves can be fitted with the Top Control in order to obtain continuous control with variable functions.
The figure 2.1 below shows various combination capabilities of the Top Control positioner combined with various pneumatic control
valves. A vast range of connections and valve diameters is available, although not displayed in the figure below. All technical
informations about these products are described in the relevant data sheets. The product range will be continuously increased.
Top Control
Typ 8630
Fig. 2.1: Overview of mounting options for the Top Control with various valve types
Top Control Positioner
a control valve with a pneumatic actuator
a Top Control positioner
with
Angle valve
Type 2000
or Type 2632 with
Diaphragm valve
Type 2030
with
Diaphragm valve
Type 2031K
or Type 2031
with
Ball valve Type 2652
or Type 2655
73