Table of Contents
Advertisement
Available languages
Available languages
6.3
Commissioning as a position controller
Follow the pneumatic and electrical connection instructions before commissioning (chapter 5).
6.3.1 Basic configuration
Select the following basic configuration for the initial commissioning :
•
Enter the displacement range of the pneumatic actuator.
•
Enter the unit of the selected input signal (4..20 mA, 0..20 mA, 0..10 V or 0..5 V).
•
Start the self-calibration of the positioner to the selected operating conditions(Autotune).
6.3.2 Operating mode for basic configuration
Assignment of the keys:
MANUAL/AUTOMATIC key
Arrow keys
Top Control Positioner
Changing between main- and submenu
e. g. ACT FUNC - FUNCSNGL
Changing between same level functions
e. g. ACTFUNC - INPUT
95
Advertisement
Chapters
Table of Contents
