Configuration With Web Server; Establishing A Connection To The Web Server - Burkert AirLINE 8652 Series Operating Instructions Manual

11

CONFIGURATION WITH WEB SERVER

The valve island AirLINE Type 8652 has an integrated web server via which the device can be configured.
The web server can be used for the following protocols:
• PROFINET
• EtherNet/IP
• Modbus TCP
For access via web server, the device has a separate IP address.
11.1

Establishing a connection to the web server

Configuring multiple devices:
Because the devices have the same IP address upon delivery, there can only be 1 as yet uncon-
figured device in the network so that the device can be identified.
▶ Connect to the network and configure the devices individually in sequence.
→
Connect the PC to the device via a network cable.
→
Enter the IP address in the address line of the web browser.
With Ethernet/IP and Modbus TCP, the IP address of the device upon delivery is 192.168.0.100.
With PROFINET, the IP address is preset to 000.000.000.000. First, an IP address must be issued with a
suitable tool, as otherwise there will be no connection to the web server. The IP address can be set with the
display of the fieldbus gateway:
>
Parameters Ind. Comm.
If the IP address has been changed to an unknown value, the current IP address can be read in the Bürkert
Communicator software or the display of the fieldbus gateway.
Figure 31: Web server view
58
>
IP settings
English
Type 8652
Configuration with web server